Canopy Led Lights Led Surface Mounted gas sation lamp LQ-GS06

INSTALLATION KIT(NOT INCLUDED):

(1) Junction Box 

(2) Φ1''Stem 

(3) Conduit Nuts 

STEP 1: Feed the luminaire leads through the Stem and attach Stem to luminaire by threading the stem into the threaded hub. 

STEP 2: Assemble the junction box to the Stem by placing one of the conduit nut onto stem. 

STEP 3: Loosen, do not remove, junction box screw and flip junction box cover up. Place the junction box onto the stem. 

STEP 4: Place the second conduit nut on to the stem from inside the junction box and tighten the nut. 

STEP 5: Reference luminaire installation instructions for making electrical connections. 

STEP 6: Sealed by waterproof glue between fixture and pole.

SIMPLE METHOD OF INSTALLATION:

1. Make sure that the ceiling can support the weight of the lamp

2.Put the fixture on the ceiling, make four marks according to 4 mounting kits, then drill 4 holes for them.

3.Connect the wires correctly and make sure the good wire protection.

4.Get rubber plugs into the holes, match 4 mounting kits to the rubber plugs, then fix the fixture on the ceilling by screws. Ensure that no wires are pinched during installation of luminaire.

5.After installation , sealed by waterproof glue between fixture and the mounting surface.Openings one hole greater than 40mm through hole in the ceiling. safety rope：The safety rope will be hung on the lamp body, the other end fixed to the ceiling expansion bolts