Here is Long Lifetime LED Street lamps Factory talking about Led Lamp Heat Dissipation Problem.
If you have any idea about Long Lifetime LED Street Light, welcome to contact us and discuss.
At present, the misunderstanding of LED heat dissipation is mainly reflected in the following aspects:
1. The internal quantum efficiency is not high.
When electrons and holes recombine, photons cannot be generated 100%, and it is generally called "current leakage" to lower the recombination rate of carriers in the PN region. The leakage current multiplied by the voltage is the power of this part, that is, it is converted into heat energy, but this part does not occupy the main component, because the internal photon efficiency is now close to 90%.
2. The internally generated photons cannot be completely emitted to the outside of the chip and finally converted into heat.
This part is the main one, because the current external quantum efficiency is only about 30%, and most of it is converted into heat.
3. Over-reliance on thermally conductive materials.
Because of the high-tech materials used, the heat can be dissipated. Its practical ordinary aluminum heat dissipation, after repeated tests, the temperature of the heat sink is only 3-5 degrees Celsius higher than the bottom of the radiator. That is to say, if a material with excellent thermal conductivity can be used, the temperature can be lowered by 3-5 degrees Celsius when the thermal resistance is zero.
4. Superstition heat pipe.
The heat pipe has a good thermal conductivity, which is beyond doubt. But the heat that is derived from the heat sink eventually needs to go tropical through air convection. If there are no fins that dissipate heat, the heat pipe will soon reach thermal equilibrium and the temperature will rise with the heat sink. If you add heat sink fins to the heat pipe, you will eventually use fins to dissipate heat. Moreover, the contact points of the fins and the heat pipes are not as good as other ways. The result is a high cost and no improvement in heat dissipation. However, it is useful to use heat pipes on integrated LEDs, but it must be structurally sound!
Micle 2019-09-09 11:16:51
Hong Kong International Lighting Fair (Autumn Edition)
Time: 27, Oct—30, Oct, 2019
Add: 1 EXPO Drive, Wanchai, Hong Kong
Booth NO.: 5E-H11
Hong Kong International Outdoor and Tech Light Expo
Time: 29, Oct--1, Nov, 2019
Add: Asia international Expo, Hongkong international airport, Lantau Island, Hong Kong
Booth NO.: 8-B20